



Generator Features
* Voltage: 380V ± 38V @ 50Hz ± 10Hz
* Output Power: 65KW
* Tube Voltage: 40kV – 150kV, in 1kV steps
* Tube Current: 10mA – 800mA
* mAs: 0.1 – 800mAs
* Max. tube current on continous fluoroscopy: 20mA
* Max. tube current on pulsed fluoroscopy: 40mA
X-Ray Tube
* Tube Focus (Large/Small): 1.2mm / 0.6mm
* Anode Thermal Capacity: 400KHU (Rotating Anode)
* Rotating Anode Speed: 9700rpm
Dynamic Flat Panel Detector (Wired)
* Materials: A-Si (Amorphous Silicon) – CSI
* Active Area: 430(H) × 430(V) mm
* Pixel Pitch: 139 μm
* A/D conversion: 16-bit
Flat Panel Detector (Wired/Wireless)
* Materials: A-Si (Amorphous Silicon) – CSI
* Active Area: 430(H) × 430(V) mm
* Pixel Pitch: 139 μm
* Optional pixel pitch: 100 um
* A/D conversion: 16-bit
Mechanical specifications
* Vertical travel of the table: 500 mm ~ 720 mm
* Longitudinal travel of the tube column: 2500 mm
* Longitudinal travel of the table surface: 1000 mm
* Transverse travel of the table surface: 260 mm
* Tube up and down: 1300 mm (the lowest position of the tube is 35 cm from the floor)
This high-frequency digital X-ray system integrates advanced digital radiography and fluoroscopy capabilities, enabling the examination of diverse anatomical regions—such as the head, chest, abdomen, spine, pelvis, and extremities—in standing, supine, or lateral positions. Its design significantly enhances diagnostic accuracy in orthopedics and traumatology by allowing the dynamic evaluation of bones, soft tissues, and joints in motion, under weight-bearing conditions, and throughout post-operative follow-up. Furthermore, it serves as a key tool for pulmonology and neurosurgery departments by identifying causes of dyspnea, monitoring pulmonary pathologies, and analyzing respiratory effort alongside diaphragmatic motion, while also supporting contrast studies for gastrointestinal and gynecological diagnostics.